Bnd-50 Se36 Instructions Jun 2026

The master clock must reflect the exact current time for scheduled automation to function correctly.

| Tool | Specification | |------|----------------| | Welder | MIG or TIG (steel, 0.030" wire) | | Angle grinder | With flap disc & cutoff wheel | | Drill | 12mm cobalt bit | | Punch set | Center punch | | Floor jack & jack stands | 3-ton min | | E36 rear subframe bushing tool | Or press | | Torque wrench | 20–150 Nm range | | Paint/primer | Rust-preventative (e.g., epoxy or zinc primer) | | Safety gear | Welding helmet, gloves, ear/eye protection | bnd-50 se36 instructions

Before configuring your device, ensure your electrical load aligns with its physical and capacity safety limits: : 230V–240V AC, 50Hz Maximum Current : 13A The master clock must reflect the exact current

If you’d like, I can also convert this into a or create a shortened quick-reference card version. Just let me know. : The outlet continuously supplies power, bypassing all

: The outlet continuously supplies power, bypassing all schedules.

to cycle through day combinations (e.g., individual days, weekdays, weekends, or all 7 days). to set when the device should turn on. Set Off Time again to see "1 OFF." Repeat the steps to set the turn-off time. to return to the main display. панда електроникс Operating Modes (or ON/AUTO/OFF) button to cycle through modes: : The outlet is permanently on. : The outlet is permanently off. : The timer will follow your programmed schedule.