Do not turn off the router or unplug the cable during this process. The router will automatically reboot when finished. Troubleshooting Common Firmware Issues Wrong hardware file used. Re-verify your bottom sticker says A2. Router Boot Loop Corrupted file upload. Perform a hard 30-second pinhole reset. No Internet After Update APN settings wiped clean. Re-enter your mobile carrier APN manually.
The upgrade may have cleared your Mobile Network settings. Log back into the web UI, navigate to the WAN / LTE Settings , and verify that the APN (Access Point Name) matches your carrier’s requirements. Many carriers require you to manually input the APN to establish a 4G data link. Wi-Fi Network Name (SSID) Disappeared
Operating systems for routers require routine updates. Running outdated firmware can expose your network to performance drops and security risks. dwr-m960 a2 firmware
This process takes approximately 6-8 minutes. You will need a (do not do this over WiFi).
Concurrent dual-band AC1200 (867 Mbps at 5 GHz and 300 Mbps at 2.4 GHz). www.dlinkmea.com Critical Firmware Updates Security Patches: Do not turn off the router or unplug
The router will take a few minutes to update and will reboot automatically. Do not turn off the power during this process.
Log in with your admin credentials. If you have never changed it, look at the sticker on the bottom of the router for the default password. Step 3: Flash the New File DWR-M960 - 4G AC1200 LTE Router - D-Link Re-verify your bottom sticker says A2
Updates the internal modem configuration files to better support evolving 4G/LTE frequency bands used by telecom providers.