Ccna-2v7.0 Case Study -rev B- -

Implement fully specified static routes (using both next-hop IP and exit interface) to connect branch VLANs to the core network.

To eliminate hardware-crushing loop storms across redundant uplinks, explicit STP configurations dictate exactly which root bridge takes priority over specific corporate VLAN traffic distributions. ccna-2v7.0 case study -rev b-

: On the Main Router or Multilayer Switch (MLS), configure sub-interfaces (for Router-on-a-Stick) or Switched Virtual Interfaces (SVIs) to allow communication between different VLANs. 3. Implement Layer 2 Security Secure the switch access layer against common attacks. Implement fully specified static routes (using both next-hop

or Layer 3 switch configurations to enable communication between these segments. 2. Basic Device Configuration & Security ccna-2v7.0 case study -rev b-