Connect the two wires to the terminals marked and P2 on the remote controller terminal block.
Choose a location experiencing average, unobstructed room air circulation.
: Use putty to seal the wiring lead-in hole, preventing insects or moisture from entering the casing. 2. Mounting the Controller daikin brc1c51 61 installation manual
To reset a Daikin fault, you must enter the diagnostic mode using the remote control to retrieve the fault code. Then, use the On/ Peninsula Air Conditioning Daikin iLINQ Quick Start Guide
Keep the remote control wiring at least 50mm away from power lines to avoid electrical interference. 3. Mounting the Plate Connect the two wires to the terminals marked
| Feature | Daikin BRC1C51 | Daikin BRC1C61 | | :--- | :--- | :--- | | | Older SkyAir & split systems (R22/R410A) | Newer SkyAir, VRV, and modern residential units | | Display | Monochrome LCD with green backlight | Monochrome LCD with white/blue backlight | | Thermistor | Internal sensor only (optional external) | Internal + improved external sensor logic | | Voltage | 12V DC (from indoor unit) | 12V DC (from indoor unit) | | Physical size | 78mm x 120mm (same face plate) | 78mm x 120mm (same face plate) |
: Includes "pre-operation" checklists, such as checking for foreign objects in the unit and ensuring the unit is mounted in a place strong enough to support its weight to prevent hazardous vibration. DENV | Daikin Entering Field Setting Mode
Once the wiring is secure and the casing is snapped back together, turn on the main power supply to begin the setup. Entering Field Setting Mode