Hold the camera mounting template or bracket against the wall or ceiling. Mark the screw holes with a pencil. Drill pilot holes into the marked spots. If you are mounting to drywall or masonry, insert the appropriate wall anchors. Step 4: Secure the Camera and Protect Cables
Always unbox your cameras and connect them to your network on a test bench before mounting them on walls or ceilings. Verify that the cameras power on, connect to the network, and display a clear image. It is much easier to troubleshoot a defective cable or firmware issue at your desk than on a 3-meter ladder. Step 2: Route the Cables network camera networkcamera install