Connect the clamp to the negative terminal of the battery, or to a solid, unpainted metal part of the vehicle chassis away from the fuel line (if charging inside the vehicle). 3. Setting the Charge Mode
The digital display will cycle through voltage, current, and percentage. When full charge is reached, the green LED will light, and the display may show “FUL” or “100%.” bradex bx60 battery charger manual
Follow these exact steps to ensure a safe connection and effective charge cycle. Step 1: Inspect the Battery Connect the clamp to the negative terminal of
While specific manufacturer datasheets vary, the BX60 generally adhers to these industry-standard specifications for its class: When full charge is reached, the green LED
No Power: Check the fuse located on the back or bottom of the unit.
Remove the battery from the vehicle if required by the manufacturer. Clean the battery terminals using a wire brush. 2. Connection Sequence