What on your DS100E when plugged in?
Then, the familiar chime of a USB connection. The blue light on the VCI unit blinked—not the frantic, panicked blinking of a broken device, but the slow, rhythmic pulse of a unit ready to work.
Attempting to flash firmware files that do not match your specific serial number or mainboard configuration (e.g., single-board vs. dual-board clones). delphi ds100e firmware update problem link
“The ghost is out of the machine. Tell Houston to fix that link, or next time I’m sending the binary by carrier pigeon.”
Click ; the VCI status should show as "Found" but may indicate that the firmware version is outdated. 3. Executing the Firmware Flash What on your DS100E when plugged in
The Delphi software is looking for the device on one virtual COM port, while Windows has assigned it to another.
Ensure the VCI is connected to the PC via USB and to the vehicle for 12V power. Click the button in the Hardware Setup screen. Attempting to flash firmware files that do not
Navigate to Windows Recovery settings and disable Driver Signature Enforcement . This is strictly necessary if you suspect a cloned FTDI chip is being rejected by the OS.