Nokia G-010g-r Manual !new! -

Off: No optical signal is being received; check your fiber-optic cable. Off: Normal operation.

Unlike a router, there is no complex "Bridge Mode" setting to enable in the menu because this device is . The G-010G-R is a Layer 2 bridge. It sits between your ISP's GPON network and your Ethernet network, supporting VLAN and QoS settings, but it does not handle routing or NAT (Network Address Translation). nokia g-010g-r manual

Installation is typically performed by a professional, but if you are reconnecting the device, follow these steps: Off: No optical signal is being received; check

: Most units are pre-configured by your ISP and do not require manual user setup beyond physical connection. The G-010G-R is a Layer 2 bridge

Connect the other end to the or Internet port of your standalone Wi-Fi router. 3. Power On the Device Plug the power adapter into a standard wall outlet. Connect the barrel plug to the POWER input on the ONT.