This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. ACTIVATOR KJ.120829.exe
In aircraft interior assembly, certain thermoplastics and composites resist standard adhesive bonding. The is applied via a fine mist to the bonding surface, neutralizing surface passivation and allowing structural acrylics to achieve full shear strength within minutes. activator kj 120829
| Problem | Probable Cause | Solution | | :--- | :--- | :--- | | Adhesive "beads up" (poor wetting) | Contaminated surface or expired activator | Clean substrate again; open a fresh bottle of | | Slow cure or no cure | Dwell time too short (solvent present) or too long (>20 min) | Reapply activator, waiting exactly 1-2 min before bonding | | White residue on surface | High humidity during application | Dehumidify workspace or apply activator in thinner coat | | Skin irritation after handling | Incompatible glove material | Switch to double-layered nitrile; wash exposed skin with soap/water | This public link is valid for 7 days