Creative Gigaworks T3 Volume Control Replacement Full ((top)) Direct

Wiggle the cable near the base of the pod; if audio cuts in and out, the cable needs a re-splice. LED light is completely off No power reaching the pod Check the main fuse on the back of the subwoofer chassis. If you want to move forward with the repair, let me know:

: Most "broken" pods are simply dirty. Spraying electronic contact cleaner into the potentiometer can often resolve the issue. If it is completely failed, you will need to desolder the old part and solder in a matching replacement. Reassemble : creative gigaworks t3 volume control replacement full

Peel off the rubber anti-slip pad on the bottom of the control pod to reveal the hidden screws. Remove the screws using a small Phillips screwdriver. Carefully separate the plastic housing. Step 2: Remove the Control Knob and PCB Wiggle the cable near the base of the