The flash memory may be physically damaged. You can try increasing the "Bad Block" allowance in the settings, but the drive's reliability will be low.

Interrupting a low-level flash can permanently brick the controller hardware.

In , ensure Factory Mode and Auto Disc Size are selected.

Q: Is there a fix for the issue? A: Yes, a fix has been discovered, which involves updating the firmware to version FA04 (or later) or modifying the device's VID and PID to match the expected values.

: Low-level flashing structures your drive from scratch. All data will be permanently wiped.

The tool will flash the firmware and re-partition the drive. Do not unplug the drive.

Once the computer makes a sound, release the short, and the AlcorMP tool should recognize the device in Test Mode. Summary of Fixes Probable Cause Firmware Corrupted Run AlcorMP Unknown Device Driver / Firmware Uninstall Device / Reflash Not Detected Hardware / Dead Test Mode / Shorting