Connect via cable once and run adb tcpip 5555 . Then, disconnect the cable and run adb connect :5555 .
./emulator @Your_AVD_Name -qemu -device usb-ehci,id=usb -device usb-host,vendorid=0x0403,productid=0x6001 Use code with caution. Why this works better: connect usb device to android emulator better
emulator -avd YOUR_AVD_NAME -usb-passthrough vendorid=0xXXXX,productid=0xYYYY YOUR_AVD_NAME with your actual emulator name and the with your device's IDs. Android Open Source Project Option 2: Using VirtualBox (For Android-x86) Connect via cable once and run adb tcpip 5555
Note: this guide focuses on practical approaches, not on unsupported hacks. Which method is best depends on the device type, whether you need raw USB access, and whether you can instead test using a real device or an alternative VM-based approach. Identify the 4-character hexadecimal numbers
Identify the 4-character hexadecimal numbers. For example, if your Hardware ID is VID_1B96&PID_0F01 , your numbers are: 1b96 Product ID (productid): 0f01 Step 3: Launch the Emulator with USB Passthrough
: System Information -> USB -> Select your device -> Look for Vendor ID and Product ID. Linux : Run lsusb in the terminal. Example IDs: Vendor ID = 0x0403 , Product ID = 0x6001 Step 2: Launch the Emulator via Terminal
USB 3.0 Extensible Host Controller Interface (xHCI) Mismatches