Hilti Te 17 Parts Diagram Jun 2026

Pay close attention to the O-rings on the piston. If the diagram shows worn or missing seals in this area, the tool will lose its hammering impact entirely. 3. The Gearbox and Drive Train

If your TE 17 makes normal motor noise but has zero hammering, the O-ring (#20) is almost certainly dead. The parts diagram makes it clear: you must remove the barrel, pull out the drive piston, and carefully roll on a new O-ring with silicone grease (not regular grease—it will clog the pneumatic chamber).

Before dismantling, take photos of the gear assembly and wiring to assist in reassembly. Maintenance Tips to Avoid Extensive Repairs hilti te 17 parts diagram

The TE 17 was updated over the years (TE 17-C, TE 17-M). Always verify your tool’s Serial Number (SN) before ordering parts. A 2005 diagram differs slightly from a 2015 diagram.

Protects the motor if the drill bit binds. Pay close attention to the O-rings on the piston

By studying the and performing preventative maintenance, this classic tool can provide decades of service.

When looking at a Hilti TE 17 schematic, follow this sequence to diagnose your tool safely: Step 1: Locate the Carbon Brushes First The Gearbox and Drive Train If your TE

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.